Weeding Q&A

Question 1

Guest

Hi Niall, I've had this flame gun for a couple of years.

Asked 8 months ago 1 answer

Sheen X300 Flamegun

Question 2

Victoria bacon

I am trying to get two replacement heads and screws for my two golden gark rakes. I have one which is whole but the other two have broken prongs. Any suggestions. It seems such a waste to have to throw them away.

Asked 8 years ago 1 answer

Golden Gark Multipurpose Garden Tool

Question 3

Freda Johnston

How do you decide what hoe head size is best. Thank you

Asked 6 years ago 1 answer

Garden Supplies > Tools & Equipment > Weeding > The Stirrup Or Oscillating Hoe

Question 4

Paul

Hi I've broken the blade on my stirrup hoe and will buy a replacement blade. Can you point me to a link or video where I can see how this is done and what tools I might need. Thanks

Asked 6 years ago 1 answer

Garden Supplies > Tools & Equipment > Weeding > Replacement Blade For The Oscillating Or Stirrup Hoe

Question 5

Guest

Where do I find your weed hoe in the USA

Asked 1 year ago 1 answer

Garden Supplies > Tools & Equipment > Weeding > The Stirrup Or Oscillating Hoe

Question 6

Guest

No pressure after pumping Sheen burner

Asked 2 years ago 1 answer

Sheen X300 Flamegun

Question 7

marie lafferty

Hi can you tell me what is the diameter of the flame funnel. also in the image it shows it as quite a Hairy flame, does it become more controlled the lower you go to the ground.thanks in advance

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 8

Roisin Browne

Hi,I have a bramble problem in my garden and want to clear a large area ( approx 30 m by 8 m)of a rock garden. It is covered in brambles and valerian abs I want to clear the area we’ve done this by hand a few times but it grows back as we didn&rsqu...

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 9

Glenn Casey

The washer on the pump seems a little to small and takes a lot of pumping to build up pressure.is it possible to tighten it up to make it spread and fill the tube?

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 10

david gilmore

where can i purchase the fire retardant at flame nose rear?

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 11

Cecilia

Hi, we want to finish a wooden fence by torch burning (shou sugi ban). Would this flame-gun do the job?

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 12

Paul

Hi, after turning off the burner do you release the air from the tank

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 13

Damien Duffy

Sheen X300 Flamegun when will this be available again i am looking to buy one ASAP?

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 14

Terry Hopp

Hello, I am interested in purchasing a Sheen x300 flame gun for my husband for Father's Day. Can you tell me when it will be back in stock?

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 15

Todd Sullivan

Hi, I have a roll of Mypex Weed Control Landscape Fabric that I purchased from yourselves. I want to make holes in it to plant flowers. Would this be good at making the holes? I watched the video, and it looks to burn very hot with a large flame, maybe...

Asked 4 years ago 1 answer

Sheen X300 Flamegun

Question 16

John Browne

Is it ok to use this on an old stone wall, to help kill off ivy? Question really is about using it in a more horizontal position, rather than pointing at the ground.

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 17

Karen Dervan

I had my Sheen gun delivered today. I'm trying everything but the wick will not light. There is sufficient pressure (5psi) and I can hear and see the fuel being released to the coil. But the wick will not light, no matter what I do. Any ideas? You've to c...

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 18

Bill Taylor

I was wanting to order the flame gun; but I noticed that it is currently out of stock. Do you know when it will become available again? Also I wanted to know whether the hood is advisable particularly when working near buildings. Also is it OK on mono blo...

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 19

Richard

Removing couch grass and Bindweed? Hi, do you think this Flamegun will work to remove couch grass and bindweed as I have this all over a new garden I have?

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 20

Georgie

Hi There - Does the inferno kill horsetail weed? Just been out with my bunson burner to try and it seemed to take massive offense to the heat and melted. Pay this might work! Thank you!

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 21

Bushy

Hi guys, my wife has developed an allergy to razors, and she is getting very untidy down below. Would this weed burner get her back on track?

Asked 5 years ago 0 answers

Sheen X300 Flamegun

Question 22

Jim Foran

Hi, Interested in this for week control. Where would you source parrafin/kerosene in the Sligo area for use in the Flamegun

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 23

Walter van der Merwe

Hi Andrew, I saw your review on the Sheen flame gun, would it be as effective on briars new growth, I do not like spraying and hopefully the flame gun will be a way around it.Thank you.Regards,Walter

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 24

Jane

Would this work on a large area of tarmac or would it melt it?

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 25

VINCENT

Is it effective on ground ivy?

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 26

Kathy clark

Can it be used on hogweed?

Asked 5 years ago 1 answer

Sheen X300 Flamegun

Question 27

Olive

Hi Niall,I'm looking to clean up a gravel driveway without chemicals and this looks a plan. Do you think it could take care of brambles as well?

Asked 6 years ago 1 answer

Sheen X300 Flamegun

Question 28

Hawt Cwnt

You say in the description it kills weeds off patio and paving. But won't it blacken and/or crack the paving stones from the fire and the heat?

Asked 6 years ago 1 answer

Sheen X300 Flamegun

Question 29

wendie

Hi I'm interested in purchasing this but just wanted to know can you kill weeds in grass/lawn area without killing grass? Also wondering if you have a lot of area to do and need to refill tank is it safe to do while still hot after turning off? Thanks

Asked 6 years ago 1 answer

Sheen X300 Flamegun

Question 30

Nichola Fletcher

I've been toying with buying one of these. As well as gravel areas etc, we have a gravel garden with precious plants in it but quite spaced out till they expand. I can see the extent of the flame in the video & pictures, but how far away from plants y...

Asked 6 years ago 1 answer

Sheen X300 Flamegun

Question 31

Mark

What are the cleaning and maintenance tools?

Asked 6 years ago 1 answer

Sheen X300 Flamegun

Question 32

Andy

Can it be used on tarmac drive ways for moss removal and weeds

Asked 6 years ago 1 answer

Sheen X300 Flamegun

Question 33

Maria stack

I bought a flamegun from you 2 weeks ago. It's great. Do you stock the wheels and flame shield?

Asked 6 years ago 1 answer

Sheen X300 Flamegun

Question 34

Damian

Hi,Would there be any issue ordering one of these and bringing it (unopened or used) onto a plane (Ryanair)as part of the carry-on luggage?

Asked 7 years ago 1 answer

Sheen X300 Flamegun

Question 35

Fiona Neill

I would like to order one of these but live on Isle of Bute Scotland. How much would delivery be for this area?

Asked 7 years ago 1 answer

Sheen X300 Flamegun

Question 36

Jenny

Can it be shut off quickly?

Asked 7 years ago 1 answer

Sheen X300 Flamegun

Question 37

Guest

Can you confirm this is the heavy duty and not the trenching hoe?

Asked 3 years ago 1 answer

Chillington Heavy Duty Hoe or Digging Azada With Handle

Question 38

Guest

What kind of paint do you use on metal?

Asked 3 years ago 1 answer

Chillington Heavy Duty Hoe or Digging Azada With Handle

Question 39

Guest

What is the difference between this and the Stow oscillating hoe?

Asked 3 years ago 1 answer

Garden Supplies > Tools & Equipment > Weeding > The Stirrup Or Oscillating Hoe

Question 40

Guest

Do you sell replacement heads?

Asked 1 year ago 1 answer

Golden Gark Multipurpose Garden Tool

Question 41

Guest

replacement blades

Asked 1 year ago 1 answer

Garden Supplies > Tools & Equipment > Weeding > The Stirrup Or Oscillating Hoe

Question 42

Guest

My golden Gary has just broken in 2 🙁

Asked 1 year ago 0 answers

Golden Gark Multipurpose Garden Tool

Question 43

Guest

what is the total weight of the Chillington Heavy Duty Hoe

Asked 1 year ago 1 answer

Chillington Heavy Duty Hoe or Digging Azada With Handle

Question 44

Guest

Handle length

Asked 1 year ago 1 answer

Chillington Grass Slasher & Weeder

Question 45

Guest

What factors would make the XXL Gark preferable to the standard size?

Asked 1 year ago 1 answer

Golden Gark Multipurpose Garden Tool

Question 46

Guest

X300

Asked 1 year ago 1 answer

Sheen X300 Flamegun

Question 47

Guest

How do you sharpen it.

Asked 11 months ago 1 answer

Chillington Grass Slasher & Weeder

Question 48

Guest

Hello, do you also have an oscillating hoe of 6 or 8 cm?

Asked 10 months ago 1 answer

Garden Supplies > Tools & Equipment > Weeding > The Stirrup Or Oscillating Hoe

Question 49

Guest

The last couple of times I used my Sheen 300 it burned through almost a whole tank of paraffin in under 15 minutes

Asked 7 months ago 1 answer

Sheen X300 Flamegun

Question 50

Guest

Would this be ok as I am 4ft 9 and disabled but need a comfortable weed fork

Asked 6 months ago 1 answer

Garden Supplies > Tools & Equipment > Weeding > Greenman Long Handled Weed Fork - W3255

Weeding Q&A

Activity timeframe

Browse by Category

Browse by Category

Tools