Liners &amp; Covers Q&amp;A

Just received 6x4 version. There are 10 small brackets with each having 2 xxxx holes which are not in the component list and also ten plastic washers (says steel on the web). How do these interrelate if indeed they do. Also 19 screws are included which a...

Question 9

Raymond

Asked 5 years ago 1 answer

HiI want to buy two 6x3 covers for raised beds I bought from you. But having read this review, below, I'm concerned I won't be able to put it together as in the sales picture. Have you remedied any of the following concerns:The 'complete kit' does not...

Question 10

Sara Keene

Asked 4 years ago 1 answer

Hello, I am planning some 1.7m x 2.6m poly tunnels. What size polythene sheet would fit? Would the 3m x 5m be OK?

Question 11

Roger Lane

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Polythene 2.8m x 4.0m

Question 12

John

Sorry, I forgot, is your website offering the 3 metres x 5 metres option for polythene, needed for an 8' x 4' raised bed?Thanks.

Asked 5 years ago 1 answer

Raised beds > Liners & Covers > Polythene 2.8m x 4.0m

Question 13

Yvonne watson

What size is this enviro mesh please

Asked 6 years ago 1 answer

I have 4 of the 6x4 tunnels- How many beds will one sheet fit of the giant mesh if I cut it please? Thank you!

Question 14

Kat

Asked 6 years ago 1 answer

Hi Could I get a longer length to cover a 8ft x 3.5ft . thanks.

Question 15

Damian

Asked 8 years ago 1 answer

hello do you do a 4 x 4 size? thank you

Question 16

Richard

Asked 8 years ago 0 answers

What size does it come in

Question 17

Richard Smyth

Asked 9 years ago 1 answer

How big is this mesh? Will it fit a 6f x 4t frame?

Question 18

Catherine

Asked 9 years ago 1 answer

Why dontbyoubputbthe vdimensions of the enviromesh on this page?

Question 19

Kevin O Donovan

Asked 9 years ago 0 answers

Hi, What size would you recommend for a raised bed 6ft x 3ft and 18" deep? Also can water pass through the membrane, thanks

Question 20

John Chawke

Asked 3 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 21

Nadine

which liner would you suggest for your 8ft x 2ft bed?

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 22

Eleanor

Hi, my bed is 120x 80cm, will one of these work and if so which would you recommend? Many thanks

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 23

Lydia

Hi can you please tell me exactly what material the liners are made from please. Thank you

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 24

Tom

Hi, I'm going to buy your 6x4 raised bed with one of these liners. Unfortunately, I do not have a suitable stapler to fix the liner to the wood. What nails would you recommend I purchase to fix the liner in place?

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 25

David

Hi, I am looking to get the 8' x 4' 21" raised bed, which will go onto the concrete base of an old shed. I can't see a liner for that size of bed though, do you do these or would you recommend something else?

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 26

Joanne Campbell

is there an easy method to inserting the liner, we are complete novices and it all seems a bit daunting, thanks.

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 27

Tony Lomas

Hi Niall, I'm going to create a garden area with raised beds that I have already bought from you. I will be using a 2m x 100m roll of weed matting from you, is it worth me buying the liners for the 2 off 6ft x 4ft beds or just use leftovers from the roll?...

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 28

Patrick Mc Intyre

Hi i have your raised beds but I am wondering if this product is just a liner for the sides and not the bottom.only around the sides inside?Is it needed to have a liner on the bottom i have 21" beds?

Asked 4 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 29

Rhodri Evans

Hi Niall, it's around a foot high so on second thoughts maybe a higher liner would be requited? How long could I expect a liner to last as well please? Thank you.

Asked 6 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 30

Oonagh

Hi Andrew. The raised beds I am building is 245cm long, 57cm wide, 55cm high. What would the lining cost for this? Do you cut the lining a little bigger? How much soil do I need? How much would that cost? Do you have a delivery charge? Many thanks

Asked 8 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 31

Mrs Carol Drury

On your response to my question on how to fit the liner to my 21" raised bed, you say it should not be in two pieces but the liner I have received from you is in two pieces. Am I to understand that it should not be ?

Asked 8 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 32

Mrs Carol Drury

I have a 21 inch raised bed and have just received the linerIt appears to be in two pieces could you pleased give me some guidance on how to fit the liner

Asked 9 years ago 1 answer

Raised beds > Liners & Covers > Liners for Allotment, Premier and Deluxe Raised Beds

Question 33

Tracey Elliott

Canyou order the kit with mesh instead of polythene

Asked 3 years ago 1 answer

I am making two bespoke tunnels to fit my existing raised beds. Roughly what distance is required between the pipes.Regards, Greg

Question 34

Greg Russell

Asked 4 years ago 1 answer

Hi, our raised bed is 9 foot x 4 foot - is it possible to get a kit to fit it? What do we need and what cost approx please?

Question 35

Melanie

Asked 4 years ago 1 answer

Hi I have a wooden raised bed that is essentially 4ft by 7ft. It’s outer size is 1.3m x 2.3m, with 10cm ‘thick’ timbers). If I ordered the 4ft x 8ft full kit, could it be cut down to fit the 7ft bed length I have?

Question 36

Walter Jardine

Asked 4 years ago 1 answer

How susceptible is the cover to ripping, and is the polytunnel cover recyclable at the end of its life?

Question 37

Iris

Asked 4 years ago 1 answer

We’ve bought the 6x4 polytunnel kit, but didn’t realise we needed hinges. We have some, but are a bit unsure how to attach them. Can you advise how the hinges are fitted please. The hinge width seems to be wider than the top edge of the wood o...

Question 38

JANE RICHARDS

Asked 4 years ago 1 answer

Hello i have a raised bed that is about 18 inches high, and is about 3 inches short (in depth and width) of 3x6 foot. I want to have poly cover. I dont think hindhes will work at this height off the ground, but i would like your steer here. Also how would...

Question 39

Fiona Walsh

Asked 4 years ago 1 answer

Hi,What is the height of the tunnel at its highest point?Regards...Colin

Question 40

Colin Parish

Asked 6 years ago 1 answer

You give the height of the timber as being only 5cms, surely this isn't correct. I have my eye on the one pictured with the dark green painted timber and the timber looks to be way higher than 5cm. Please specify the height of the timber.

Question 41

Kevin Broaders

Asked 6 years ago 1 answer

HiMy allotment has 3 9 metre x 1.5 metre homemade raised beds constructed using 6" gravel boards one of which is dedicated this year to carrots and parsnips. So I have been considering methods of 'tunneling' it using the 25mm water pipe to protect t...

Question 42

mike

Asked 6 years ago 1 answer

Hi. Can you advise if you would need a cover for potatoes. I have 2 raised beds one which I plan to have for potatoes and the other mixed veg. Would I only need the cover for the mixed veg bed?

Question 43

Bernie Mccarthy

Asked 4 years ago 1 answer

Hi there,I have your 4x4ft allotment bed and will be planting herbs, carrots, onions, garlic and lettuce.Is this poly tunnel kit the best option for successful growing or the giant easy fleece tunnel?Thanks a mill!Karen

Question 44

Karen McCormack

Asked 4 years ago 1 answer

Hi,Can you please advise what is the quantity/ dimensions of Mesh that comes with the 4ftx4ft "Complete Mini Polytunnel Kit with Mesh Net Cover"???Both frame & mesh needed for the project will need to be reduced to size. Would I be bette...

Question 45

Margo

Asked 4 years ago 1 answer

What's the height in the middle?

Question 46

TIM

Asked 4 years ago 1 answer

i,ve got a 4ft x 4ft square have you got one to fit

Question 47

michael davies

Asked 4 years ago 1 answer

Hi Niall,The deluxe raised bed I bought was the 6'x3' size. If I bought the poly tunnel kit in the 6' x 4' could it somehow be adjusted onsite to fit over the 6'x3' deluxe raised bed? Or can you make a bespoke one for me?

Question 48

Christine Pierce

Asked 4 years ago 1 answer

Hi Quickcrop,Does the mini poly tunnel kit with mesh cover fit the Quickcrop deluxe raised bed? I don’t want gapping.

Question 49

Christine Pierce

Asked 4 years ago 1 answer

Hi,how high are the tunnels please

Question 50

Abbey

Asked 4 years ago 1 answer