Mini Polytunnels &amp; Sunbubbles Q&amp;A

what is the height on the 4ft by 4ft size kit?

Question 3

Guest

Asked 2 months ago 1 answer

Is this supposed to come with black studs for the washers to attach to?

Question 4

Guest

Asked 7 months ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Screws & Washers For Mini Polytunnels

Question 5

Guest

Hi there, what is the diameter of the tubing please?

Asked 11 months ago 1 answer

Can the blue pipes be painted

Question 6

Guest

Asked 11 months ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 7

Guest

Please sell corner Tube Connectors

Asked 2 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tube Connectors

Question 8

Guest

Do they come with stainless steel screws ?

Asked 2 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Screws & Washers For Mini Polytunnels

Question 9

Guest

What is the outer length dimension ?

Asked 2 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Corner Tube Support

Question 10

Tracey Elliott

Canyou order the kit with mesh instead of polythene

Asked 3 years ago 1 answer

Can i just buy the brackets i have tube and timber from other projects

Question 11

Wobbly Bob

Asked 3 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 12

Marie O'Neill

Hi Niall. I would like to build a Mini Polytunnel on my raised bed which is made from railway sleepers. It measures (outside) 2600mm x 1600mm. Inside: 2300mmx1300mm. I think the 8ft kit should work except for the timbers. I would need 4×1200mm &amp...

Asked 3 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 13

David little

Hi ,looking to do a dome shaped cover ,do you have a connector for the top that would take the 4 pipes ?

Asked 3 years ago 1 answer

How are the polytunnels fixed to the raised bed? I have a 6ftx4ft bed from you, and have trouble with cats! But obviously the cover needs to be removed for planting, thinning etc. Does the whole thing lift off. And will it be secure in the winds that we ...

Question 14

Lesley Goldsmith

Asked 3 years ago 1 answer

Complete Mini Polytunnel Kit With Bird Netting Cover

Question 15

G Rollinson

Hi Niall, I have a 2 Tier Corner Raised Bed from Quickcrop. What do you recommend to cover what is essentially 4 lots of 6ft x 2ft beds (ignoring the 4ft x 4ft corner for now)?

Asked 3 years ago 1 answer

Have you, or any of your customers (that you know of), used the mini polytunnel on a 1.8m VegTrug? Given the lack of availability of their purpose built ones, I'm wondering if I should just pay a bit extra and do a mini polytunnel resting on 2x2s (instead...

Question 16

Duncan

Asked 3 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 17

Bernie Mccarthy

Hi I am looking for hoops and connectors etc to cover a 16 foot by 4 foot bed. I would like a 1 metre height. Could you list the parts that I need for this please

Asked 3 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tubing 120cm lengths

Question 18

Kevin Paige

What size polytunnel connector kit would I require or raise bed size 6ft 6inch ( 2mtr)× 5ft. To carry bird netting.

Asked 4 years ago 1 answer

Hi. Can you advise if you would need a cover for potatoes. I have 2 raised beds one which I plan to have for potatoes and the other mixed veg. Would I only need the cover for the mixed veg bed?

Question 19

Bernie Mccarthy

Asked 4 years ago 1 answer

Can the tubes for the poly tunnels just be inserted into the earth rather being attached to a wooden frame.

Question 20

Alyson Pratt

Asked 4 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 21

Karen McCormack

Hi there,I have your 4x4ft allotment bed and will be planting herbs, carrots, onions, garlic and lettuce.Is this poly tunnel kit the best option for successful growing or the giant easy fleece tunnel?Thanks a mill!Karen

Asked 4 years ago 1 answer

Hi,Can you please advise what is the quantity/ dimensions of Mesh that comes with the 4ftx4ft "Complete Mini Polytunnel Kit with Mesh Net Cover"???Both frame & mesh needed for the project will need to be reduced to size. Would I be bette...

Question 22

Margo

Asked 4 years ago 1 answer

I am making two bespoke tunnels to fit my existing raised beds. Roughly what distance is required between the pipes.Regards, Greg

Question 23

Greg Russell

Asked 4 years ago 1 answer

Can the mini polytunnels be used on the split level raised beds? Just the lower part I guess?

Question 24

David Mumford

Asked 4 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 25

Norman Robertson

Hi, I am about to assemble one of your mini polytunnels I bought at the end of last year. Would like extra Fastening Spikes, can I buy them from you. Website only seems to mention extra washers and screws.

Asked 4 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 26

Melanie

Hi, our raised bed is 9 foot x 4 foot - is it possible to get a kit to fit it? What do we need and what cost approx please?

Asked 4 years ago 1 answer

What's the height in the middle?

Question 27

TIM

Asked 4 years ago 1 answer

Hi I have a wooden raised bed that is essentially 4ft by 7ft. It’s outer size is 1.3m x 2.3m, with 10cm ‘thick’ timbers). If I ordered the 4ft x 8ft full kit, could it be cut down to fit the 7ft bed length I have?

Question 28

Walter Jardine

Asked 4 years ago 1 answer

what is the internal diameter of the tubing?

Question 29

Andrew Hill

Asked 4 years ago 1 answer

Complete Mini Polytunnel Kit With Bird Netting Cover

Question 30

Pete Sowter

Can these be fitted to the Castleton raised beds with top covers or will I need to remove the top covers to fit these correctly?

Asked 4 years ago 1 answer

Complete Mini Polytunnel Kit With Bird Netting Cover

Question 31

Sara Keene

HiI want to buy two 6x3 covers for raised beds I bought from you. But having read this review, below, I'm concerned I won't be able to put it together as in the sales picture. Have you remedied any of the following concerns:The 'complete kit' does not...

Asked 4 years ago 1 answer

How susceptible is the cover to ripping, and is the polytunnel cover recyclable at the end of its life?

Question 32

Iris

Asked 4 years ago 1 answer

i,ve got a 4ft x 4ft square have you got one to fit

Question 33

michael davies

Asked 4 years ago 1 answer

What length hoops would I require for a 1.5m wide bed and a 1.23m diameter circular bed?Thank you

Question 34

Simon Growcott

Asked 4 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tubing 120cm lengths

Question 35

Alice Velic

What soil potato likes

Asked 4 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 36

GK Skelding

I need an 8x4ft mini polytunnel connector kit only.can you give me the total price please.?

Asked 4 years ago 1 answer

Hi NiallWe have x2 1.2m by 1.2m square beds that we would like to create hoop arches for, with a central top support connecting the hoops for added strength. Is there a particular tube length/connector set up you’d recommend?

Question 37

Emily

Asked 4 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tubing 120cm lengths

Question 38

Shaun

What is the external Diameter of these supports? I have 25mm Pipe with 20.4mm internal diameter.

Asked 4 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Corner Tube Support

Question 39

Raymond Fox

HiWhat component parts do I require (not including wood) for a raised bed measuring 5.5ft x 5ft?.Please

Asked 4 years ago 1 answer

Hi Niall,The deluxe raised bed I bought was the 6'x3' size. If I bought the poly tunnel kit in the 6' x 4' could it somehow be adjusted onsite to fit over the 6'x3' deluxe raised bed? Or can you make a bespoke one for me?

Question 40

Christine Pierce

Asked 4 years ago 1 answer

Hi Quickcrop,Does the mini poly tunnel kit with mesh cover fit the Quickcrop deluxe raised bed? I don’t want gapping.

Question 41

Christine Pierce

Asked 4 years ago 1 answer

Are these plastic or metal?

Question 42

Tonia

Asked 4 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Centre Tube Support

Question 43

JANE RICHARDS

We’ve bought the 6x4 polytunnel kit, but didn’t realise we needed hinges. We have some, but are a bit unsure how to attach them. Can you advise how the hinges are fitted please. The hinge width seems to be wider than the top edge of the wood o...

Asked 4 years ago 1 answer

Hi. I've just constructed one of your mini polytunnels - really easy to put together and perfect for my beds. I'm having difficulty fitting enviromesh though. This sounds really daft but I can't seem to get it to follow the curvature of the frame - it jus...

Question 44

Gorwel Owen

Asked 4 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 45

Matthew

Please can you tell me if it’s £2.75 per connector ? If not how many do you get per pack ? Thank you , Matthew

Asked 4 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tube Connectors

Question 46

Keith Fisken

Hi,Do you provide tunnel kits for raised beds sized 4 by 8 feet? If so how much would it be for two full kits?Cheers,Keith

Asked 4 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 47

richard walshaw

i have a 4' x 6' bed how many metres of the blue pipe would i require

Asked 4 years ago 1 answer

Does the kit come with plastic/poly cover too? I only see net in picture and description. If so what colour is the poly?

Question 48

Garrat

Asked 4 years ago 1 answer

Complete Mini Polytunnel Kit With Bird Netting Cover

Question 49

Abbey

Hi,how high are the tunnels please

Asked 4 years ago 1 answer