Mini Polytunnels &amp; Sunbubbles Q&amp;A

hello do you do a 4 x 4 size? thank you

Question 3

Richard

Asked 9 years ago 0 answers

We’ve bought the 6x4 polytunnel kit, but didn’t realise we needed hinges. We have some, but are a bit unsure how to attach them. Can you advise how the hinges are fitted please. The hinge width seems to be wider than the top edge of the wood o...

Question 4

JANE RICHARDS

Asked 6 years ago 1 answer

What size is this enviro mesh please

Question 5

Mary

What is tubing made of ?

Asked 9 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tubing 120cm lengths

Question 6

Yvonne watson

Asked 7 years ago 1 answer

Hi, I have raised beds of 5ft by 3foot (150 x100) do I need 3 hoops (tubing) you are still out of stock for the center tube connectors. So if I need 3 hoops, what do I connect with, will the figo bamboo connectors work? I live in the south of France, so ...

Question 7

julie SOFONEA

Asked 8 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tubing 120cm lengths

Question 8

Virginia Chipperfield

Hello Quickcrop,I've laid out the timber poles to put together my mini poly tunnels but I'm not sure if the short poles should be fixed inside or outside the long ones, and can't make it out on the instructions or video. If the short poles go outside the...

Asked 6 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 9

Greg Russell

I am making two bespoke tunnels to fit my existing raised beds. Roughly what distance is required between the pipes.Regards, Greg

Asked 5 years ago 1 answer

What size polythene should I order to cover this polytunnel? Thanks,

Question 10

Margaret

Asked 10 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 11

Catherine

How big is this mesh? Will it fit a 6f x 4t frame?

Asked 10 years ago 1 answer

What size does it come in

Question 12

Richard Smyth

Asked 10 years ago 1 answer

Hi there. Your product looks great. I have two 4x8 foot raised beds to cover. I guess I need 4 hoops rather than the three you show in your 6x4 beds? Also will the enviromesh be large enough for this?

Question 13

Jonathan

Asked 9 years ago 1 answer

Hi Could I get a longer length to cover a 8ft x 3.5ft . thanks.

Question 14

Damian

Asked 9 years ago 1 answer

Hi guys,I too have the standard allotment 6x3 beds and note the cover fits with a small overhang. Wanted to check thought that the overhang would'nt leave a space between the cover and the bed as my crops were devastated by cabbage root fly last year and...

Question 15

claire

Asked 10 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 16

Kat

I have 4 of the 6x4 tunnels- How many beds will one sheet fit of the giant mesh if I cut it please? Thank you!

Asked 8 years ago 1 answer

Would this be good for keeping cats off? I'm having a problem with cats using my raised beds as their personal toilets.

Question 17

Jackie Browne

Asked 6 years ago 1 answer

Complete Mini Polytunnel Kit With Bird Netting Cover

Question 18

Johanna

Hi, looks like a solution to my problem, I was trying to invent my own version, then saw yours. Query, in one of the photos it appears you are not using timber for the frame, would perfer this option as it would be lighter, is it piping? Can you explain. ...

Asked 11 years ago 1 answer

Hi,how high are the tunnels please

Question 19

Abbey

Asked 6 years ago 1 answer

Complete Mini Polytunnel Kit With Mesh Net Cover

Question 20

Richard Smith

Hello, what is the minimum width that you would recommend for the tunnel kit - I have a narrow spot that I would like to use it on but not sure at what point the pipe would fold rather than bend?

Asked 10 years ago 1 answer

I have beds of 4m x1200mm wide I would like to make one cover would it work and what do I need to buy

Question 21

David fountain

Asked 10 years ago 1 answer

HiOn a 4ft x 4ft raised bed what lengths of pipe would I need.

Question 22

Colin

Asked 9 years ago 1 answer

Do these and the corner pieces come with screws

Question 23

Peter Womersley

Asked 8 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Centre Tube Support

Question 24

Al

What’s the height of the 6x3 polytunnel when assembled?

Asked 7 years ago 1 answer

Mini Polytunnel complete frame kit- wood, kit and tubes.

Question 25

Shaun

What is the external Diameter of these supports? I have 25mm Pipe with 20.4mm internal diameter.

Asked 6 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Corner Tube Support

Question 26

Tim Coombe

Is the blue piping included?

Asked 8 years ago 1 answer

Hi, is the 25 mm diameter you state internal or external? I have plastic tubing with internal diameter of 25mm but I'm concerned its overall/outer diameter would not fit into the base supports. Also, have you got the "T" connectors in stock yet?...

Question 27

Don Foley

Asked 6 years ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tubing 120cm lengths

Question 28

John Griffin

Hi Niall,I bought 16 corner pieces, they are not as you said below. They are for a pipe with external diameter of 25mm. I had a roll of blue pipe inch pipe (25mm internal diameter). Maybe you could supply a diagram with dimensions, it would help others i...

Asked 7 years ago 1 answer

Hi Niall, The external diameter of the pipe i have is 30mm the internal diameter is 25mm. No amount of hot water will make that fit in a 25mm hole. I can send you a photo of the two side by side.

Question 29

John Griffin

Asked 7 years ago 1 answer

Can the Black 25mm piping be used instead of blue? I've googled everything I can thing of to see what the difference is and all anyone mentions is blue for potable, black for non-potable. I wondered if you used the blue because it was stronger or bendie...

Question 30

rachel

Asked 7 years ago 1 answer

How susceptible is the cover to ripping, and is the polytunnel cover recyclable at the end of its life?

Question 31

Iris

Asked 6 years ago 1 answer

Hi,Can you please advise what is the quantity/ dimensions of Mesh that comes with the 4ftx4ft "Complete Mini Polytunnel Kit with Mesh Net Cover"???Both frame & mesh needed for the project will need to be reduced to size. Would I be bette...

Question 32

Margo

Asked 5 years ago 1 answer

Complete Mini Polytunnel Kit With Mesh Net Cover

Question 33

Kevin O Donovan

Hi Joe,I am building some raised beds using old railway sleepers, the dimensions of the beds (x2) will be 16feet long by 8 feet wide, what would you recommend to build to cover both raised beds? I dont really want to put 4 covers on each raised bed?

Asked 6 years ago 1 answer

Hi QuickcropMy Raised Veg Bed is 250cm * 90cm (approx. 8ft * 3ft).Can you kindly recommend exactly what components I would need to construct the kit? I'm looking at the ready made & cannot see anything that suits. Can you recommend a 'made to me...

Question 34

Sanj

Asked 6 years ago 1 answer

In the 8x4 kit it states 1.2m tube lengths but in the description for an 8x4 it states 1.5m which is correct length

Question 35

Guest

Asked 1 year ago 1 answer

Complete Mini Polytunnel Kit With Mesh Net Cover

Question 36

Guest

What size bed will this cover please ??

Asked 1 year ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > Tubing 120cm lengths

Question 37

Guest

How do I fix the plastic tubing arch to a metal raised bed

Asked 11 months ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > 6 Fixing Eyes and Pegs

Question 38

GK Skelding

I need an 8x4ft mini polytunnel connector kit only.can you give me the total price please.?

Asked 6 years ago 1 answer

What material are they made from

Question 39

Guest

Asked 6 months ago 1 answer

Garden Supplies > Plant Protection > Mini Polytunnels & Sunbubbles > T Bracket for Mini Polytunnel

Question 40

Walter Jardine

Hi I have a wooden raised bed that is essentially 4ft by 7ft. It’s outer size is 1.3m x 2.3m, with 10cm ‘thick’ timbers). If I ordered the 4ft x 8ft full kit, could it be cut down to fit the 7ft bed length I have?

Asked 5 years ago 1 answer

HiI want to buy two 6x3 covers for raised beds I bought from you. But having read this review, below, I'm concerned I won't be able to put it together as in the sales picture. Have you remedied any of the following concerns:The 'complete kit' does not...

Question 41

Sara Keene

Asked 5 years ago 1 answer

Hello i have a raised bed that is about 18 inches high, and is about 3 inches short (in depth and width) of 3x6 foot. I want to have poly cover. I dont think hindhes will work at this height off the ground, but i would like your steer here. Also how would...

Question 42

Fiona Walsh

Asked 6 years ago 1 answer

Hi, our raised bed is 9 foot x 4 foot - is it possible to get a kit to fit it? What do we need and what cost approx please?

Question 43

Melanie

Asked 5 years ago 1 answer

Hi,What is the height of the tunnel at its highest point?Regards...Colin

Question 44

Colin Parish

Asked 8 years ago 1 answer

Canyou order the kit with mesh instead of polythene

Question 45

Tracey Elliott

Asked 5 years ago 1 answer